Dacor wine cellar Lock indicator blinking / Mode, not a failure

Dacor wine-cooler
error Lock indicator blinking

Wine-cooler / display referenceLock indicator blinking

The Lock indicator on a Dacor wine column blinks when a button is pressed while Lock is on. Nothing is broken. A three-second hold on Lock releases it, and it re-engages after a minute with no button input.

Also shown as Lock indicator blinking

Last reviewed

Wine-cooler / display referenceLock indicator blinking
Meaning
The Lock indicator on a Dacor wine column blinks when a button is pressed while Lock is on. Nothing is broken. A three-second hold on Lock releases it, and it re-engages after a minute with no button input.
Who handles it
Normal
Source
User Manual, Built-In Wine Cellar DRW24980RAP/LAP

What Dacor wine cellar Lock indicator blinking means.

What it means

The Lock indicator on a Dacor wine column blinks when a button is pressed while Lock is on. Nothing is broken. A three-second hold on Lock releases it, and it re-engages after a minute with no button input.

What you can safely check

Over three seconds releases it, and the panel answers.

When to call a technician

Lock stays on after you held the button.

Your Dacor tick-list / held on this device

Safe checks, in order.

0 of 4 checks done
  1. Dacor wine cellar Lock indicator blinking: The control panel of a Modernist wall oven
    Illustration. Follow your model’s instructions.
    Before you begin

    Hold the Lock button

    Over three seconds releases it, and the panel answers.

  2. Over-the-shoulder view of a technician holding a tablet with a blank checklist, a stainless dishwasher behind.
    Illustration. Follow your model’s instructions.
    Check 2

    Change settings promptly

    Lock turns itself back on if no button is pressed for the next minute.

  3. A technician testing a wall oven component
    Illustration. Follow your model’s instructions.
    Check 3

    Unlock before using other modes

    For Cooling Off or Sabbath, deactivate Lock first, as the manual says for both.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Do not read the blink as an alarm

    It only acknowledges that the panel is disabled.

Still showing Lock indicator blinking?

Tell us the model and which checks you have done, then open your request from here.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporator fanDefrost heaterControl panel123
  1. 1Evaporator fan
  2. 2Defrost heater
  3. 3Control panel

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

A little more context.

What is Lock for?

It prevents accidental setting changes. Holding the button for three seconds disables the main panel and lights the Lock indicator.

Read the supporting manual

Why is the indicator blinking?

Because a button was pressed while Lock was on. The blink tells you the press was ignored.

Read the supporting manual

The manual behind the message.

Manufacturer document

User Manual, Built-In Wine Cellar DRW24980RAP/LAP

Dacor (Dacor-branded document hosted on image-us.samsung.com)

DA68-03607F-01 / PDF p.22, p.23

The DRW24980 wine column. Lock is panel button 13 and disables the main panel.

Here to help

Good questions.
Clear answers.

Talk to our team
Why do my temperature buttons do nothing?

Lock is probably on. Release it with a three-second hold, then set your temperature within a minute.

Does a blinking Lock mean something failed?

No. It shows a press was blocked by the lock that is set.

Can Sabbath mode be set with Lock on?

Not directly. The manual says to deactivate Lock first, for Sabbath and Cooling Off alike.

Does Lock affect cooling?

No. It disables the panel only.

Let’s take care of it.

See a C-code?
Tell us the number.