The illustrated glossary

Inside your appliance. Parts, in plain English.

Learn what a part does ahead of the call, and you and the technician share the same starting point.

Long looped oven heating element with a mounting plate and two terminals lying on a wooden counter.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
A wall oven door latch and lock assemblyLatch, lock, sensor.
Parts behind a C-code.

Oven vocabulary

What the code points to.

Oven temperature probe
The temperature probe is the plug-in wire that reads the food's internal temperature. Dacor Modernist and Transitional tables print C-23 as a short temp probe sensor while the oven runs. A wet or still-connected probe also stops broil, self-clean and Sabbath modes on the Heritage wall oven.
Induction cooking zone
An induction zone only heats cookware with a magnetic, flat bottom that sits on the zone. Dacor's guides tie most no-heat and slow-heat complaints to the pan. The Heritage Induction range flashes No Pan Detected for a wrong pan. The Modernist cooktop prints codes for keys held and for a fan problem.
Refrigerator water filter
Dacor column and side-by-side units track the water filter with a Filter indicator that turns red or blinks. The column manuals give about 6 months or 300 gallons, then a 3-second hold on Filter Reset. Weak water flow can also mean a clogged filter even when the light is off.
Browse the glossary

Heat, steam and air.

Part

Oven temperature probe

The temperature probe is the plug-in wire that reads the food's internal temperature. Dacor Modernist and Transitional tables print C-23 as a short temp probe sensor while the oven runs. A wet or still-connected probe also stops broil, self-clean and Sabbath modes on the Heritage wall oven.

Part

Oven convection and cooling fans

Dacor ovens run a convection fan that cycles on and off while cooking, and a cooling fan that keeps going after the oven is switched off. Both are listed as normal. A real cooling-motor problem shows as C-A2, and the table sends you to service.

Part

Steam oven water reservoir

Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking. The 48-inch holds up to 1500 ml and the 36-inch up to 650 ml. Empty it afterward so leftover water does not affect other modes. Steam sensor and drain problems print as C-70 and C-72.

Part

Range surface burner

A Dacor Pro range burner is a head, a cap and an igniter electrode on a fixed base. The Heritage Pro manual blames a missing cap, a misaligned base or dirty electrodes when a burner refuses to light. Gas smell is a different case: leave the building, then call the gas supplier from outside.

Part

Induction cooking zone

An induction zone only heats cookware with a magnetic, flat bottom that sits on the zone. Dacor's guides tie most no-heat and slow-heat complaints to the pan. The Heritage Induction range flashes No Pan Detected for a wrong pan. The Modernist cooktop prints codes for keys held and for a fan problem.

Which part, which problem, which code.

Open a part to see the problems it can cause and the codes that mention it.

Here to help

Good questions.
Clear answers.

Talk to our team
What is inside the glossary?

Brief entries for parts that Dacor manuals mention, like a convection fan, a temperature probe or a door lock. Each explains the job of the part, not how to swap it.

Does reading an entry mean my part is broken?

No. An entry defines a term and says little about your own appliance. Its use is making code pages and technician remarks easier to follow.

Is an entry enough to order a part?

No. Parts that look alike differ between Heritage, Modernist and Transitional lines, so a technician should confirm the match first.

Where do entry links take me?

Each link goes to a page that features the part in a real case, such as a code, showing where it fits.

Let’s take care of it.

See a C-code?
Tell us the number.