Inside the appliance
Steam oven water reservoir. In plain English.
Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking. The 48-inch holds up to 1500 ml and the 36-inch up to 650 ml. Empty it afterward so leftover water does not affect other modes. Steam sensor and drain problems print as C-70 and C-72.

Where it fits.
Steam oven water reservoir in the appliance
A pull-out reservoir at the oven front on the 48-inch range, and a slide-in slot opened by the OPEN/CLOSE RESERVOIR key on the 36-inch.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A Steam oven water reservoir concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.

Dacor oven not heating
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.

Dacor oven door problems
When a Dacor oven door stays shut, it is usually locked on purpose: during self-cleaning, or by Control Lockout on a Modernist after a power cut. Wait for the lock to release, or follow the lockout steps. C-d1 and C33 are the door-related codes.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Fill to the line only
Use tap water and stay under the max line. The 48-inch Modernist range tops out at 1500 ml and the 36-inch at 650 ml.
- 2
Use oven mitts
The manual warns that the reservoir and its slot get hot while cooking and just after, so handle both with mitts.
- 3
Let it drain
After steam cooking the oven drains residual water. The manual says not to interrupt the drain, and to empty the reservoir so water does not affect other cook modes.
- 4
Restart for C-70 or C-72
Both codes are steam sensor and drain system entries. Press OFF, restart, then cut power for 30 seconds if the code stays; a technician takes over if it still comes back.
Cleaning or replacement?
Leave internal testing to a technician.
Schedule a visit when C-70 or C-72 returns after a power disconnect.
Schedule a visit when water pools under the oven or the reservoir will not seat.
Arrange a diagnosticSources and model boundaries.
The Steam oven water reservoir guidance is built on these references. Choose the manual for your own model.
- User Manual, Modernist Pro Range DOP48M86D**/DOP36M86D**
- User Manual, Modernist Built-In Electric Wall Oven DOB30M977
Rely on the guide for your precise model. Look at how we research these pages.
How much water does the steam reservoir hold?
The 48-inch Modernist range reservoir holds up to 1500 ml and the 36-inch up to 650 ml. Do not fill past the max line.
What kind of water goes in?
The 48-inch Modernist range manual says to fill the reservoir with tap water.
What is the leftover water after a steam cycle?
The oven drains after steam cooking, and the manual says not to interrupt it. Empty the reservoir afterward so residual water does not affect other cook modes.
What are C-70 and C-72?
The tables list C-70 as the steam sensor open or short while the oven runs, and C-72 as a drain system problem. The owner steps are a restart and a 30-second power disconnect.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
Dacor oven not heating
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Oven repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

