Inside the appliance
Oven temperature probe. In plain English.
The temperature probe is the plug-in wire that reads the food's internal temperature. Dacor Modernist and Transitional tables print C-23 as a short temp probe sensor while the oven runs. A wet or still-connected probe also stops broil, self-clean and Sabbath modes on the Heritage wall oven.

Where it fits.
Oven temperature probe in the appliance
The probe plugs into a connector in the oven cavity and the wire runs to the food. The manuals do not say where the sensor named in C-23 sits.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A Oven temperature probe concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Unplug it before broiling
The Heritage manual says broil settings do not work while the meat probe is connected. Disconnect it, and do the same before a self-clean cycle or Sabbath mode.
- 2
Dry the plug end
The Heritage manual says the oven can drop into Hold mode right after the probe goes in if the connector is still wet from washing. Dry the metal part of the plug with a soft cloth.
- 3
Seat the tip in the center
The Modernist Chef Mode tip says to push the probe into the middle of the meat and to avoid bone, fat and gristle.
- 4
Follow the ladder for C-23
Press OFF and restart. If C-23 stays, disconnect power to the oven for at least 30 seconds and restore it; if it still returns, a technician should check it. Transitional ranges begin the restart at the knobs.
Cleaning or replacement?
Leave internal testing to a technician.
Schedule a visit when C-23 comes back once power has been cut for half a minute.
Schedule a visit when the oven keeps dropping into Hold mode with a dry, clean probe plug.
Arrange a diagnosticSources and model boundaries.
The Oven temperature probe guidance is built on these references. Choose the manual for your own model.
- User Manual, Modernist Built-In Electric Wall Oven DOB30M977
- User Manual, Heritage Wall Oven, Models: HWO127, HWO130, HWO227, HWO230
- User Manual, Gas Pro Range DOP30*840**
- User Manual, Dual Fuel Pro Range DOP36P86DL*
- User Manual, Modernist Pro Range DOP48M86D**/DOP36M86D**
Rely on the guide for your precise model. Look at how we research these pages.
What does C-23 mean on a Dacor oven?
The Modernist wall oven, both Transitional ranges and the 48-inch Modernist range all print it as the temp probe sensor being short while the oven operates. The restart steps differ slightly by model.
Why will my oven not broil?
The Heritage manual lists a connected meat probe as one cause: broil settings do not work in that state. Disconnect the probe and try again.
Why will self-clean not start?
On the Heritage wall oven, a connected meat probe blocks the self-clean cycle. Unplug and remove the probe first, then start the cycle again.
Can I fix C-23 by myself?
Only the restart steps in the manual are for owners. Cut power for at least 30 seconds if the code lingers. Sensor work is for a technician, so book a visit if it comes back.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
C-23
C-23 on a Dacor Modernist wall oven, Transitional range or Modernist 48-inch range means the temperature probe sensor is short while the oven operates. Turn the oven off and restart it. If it returns, cut power for half a minute or longer, then book a technician.
Dacor oven not heating
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Oven repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.


