C-23 on a Dacor Modernist wall oven, Transitional range or Modernist 48-inch range means the temperature probe sensor is short while the oven operates. Turn the oven off and restart it. If it returns, cut power for half a minute or longer, then book a technician.
C-23 on a Dacor Modernist wall oven, Transitional range or Modernist 48-inch range means the temperature probe sensor is short while the oven operates. Turn the oven off and restart it. If it returns, cut power for half a minute or longer, then book a technician.
User Manual, Modernist Built-In Electric Wall Oven DOB30M977
What Dacor oven C-23 means.
What it means
C-23 on a Dacor Modernist wall oven, Transitional range or Modernist 48-inch range means the temperature probe sensor is short while the oven operates. Turn the oven off and restart it. If it returns, cut power for half a minute or longer, then book a technician.
What you can safely check
Unplug the meat probe from its socket and look at the plug for damage.
When to call a technician
C-23 returns after a restart and a power cut of at least 30 seconds.
Your Dacor tick-list / held on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Remove the probe
Unplug the meat probe from its socket and look at the plug for damage. A damaged probe is a likely thing to rule out, though the guide does not say so.
Illustration. Follow your model’s instructions.
Check 2
Turn the oven off and restart
Press OFF, or turn the burner knob to Off on the Transitional ranges, then restart.
Illustration. Follow your model’s instructions.
Check 3
Disconnect power
If C-23 returns, disconnect all power for at least 30 seconds, then reconnect.
Illustration. Follow your model’s instructions.
Check 4
Book a visit
If the code persists, the probe circuit or board needs a technician.
Still showing C-23?
Tell us the model and which checks you have done, then open your request from here.
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
Parts behind the message.
Component reference
Oven temperature probe
The temperature probe is the plug-in wire that reads the food's internal temperature.
User Manual, Modernist Built-In Electric Wall Oven DOB30M977
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 112177 Rev B / DG68-00920A-00 / PDF p.64 (Information codes)
Manufacturer document
User Manual, Gas Pro Range DOP30*840**
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01458A-00, 2023-01-17 (EN+ES+FR) / PDF p.103 (Information codes, Oven, cont.)
Manufacturer document
User Manual, Dual Fuel Pro Range DOP36P86DL*
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / PDF p.55 (Information codes, Oven)
Manufacturer document
User Manual, Modernist Pro Range DOP48M86D**/DOP36M86D**
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 115113 Rev A / PDF p.71 (Information Codes)
Printed in the Modernist wall oven DOB30M977 manual, the Transitional 30-inch DOP30*840** and 36-inch DOP36P86DL* guides, and the Modernist 48/36-inch range guide. Not printed in the Heritage wall oven, Heritage Pro range or Heritage Induction range guides.