Read the whole display
Give the model line (Heritage, Modernist or Transitional), the exact code with its dash and the model number. The restart key differs between lines.
Model-specific code library
We decode C33 on Heritage wall ovens, and C-d0 to C-A2 on the Modernist wall oven, the Transitional ranges and the Modernist 48-inch range, naming the model line each row belongs to.
On a Dacor Heritage wall oven (HWO127, HWO130, HWO227, HWO230), C33 can appear when the door stays open during cooking or broiling. Let the oven cool so C33 resets, and do not leave the door open for long while broiling.
Read the C33 checks16 researched oven codes. A display message can mean something different on each model, so the manual for yours has the last word.
C-20 on a Dacor oven means the oven sensor is open or short while the oven operates. Press OFF and restart. If it persists, cut all power for at least 30 seconds and reconnect, and book a technician if the code reappears.
Reset, then bookC-21 on a Dacor oven means the internal temperature rose abnormally high. Power the oven down and give it time to cool. The 30-inch Transitional guide then says to restart; the other guides share the longer reset ladder.
TechnicianC-22 on a Dacor Transitional range means the Sub PCB sensor is open or short while the oven operates. Turn both knobs to Off, restart, cut power for at least 30 seconds if it persists, then book a technician.
Reset, then bookC-23 on a Dacor Modernist wall oven, Transitional range or Modernist 48-inch range means the temperature probe sensor is short while the oven operates. Turn the oven off and restart it. If it returns, cut power for half a minute or longer, then book a technician.
Reset, then bookC-24 on a Dacor Transitional range means the oven vent is blocked. Open the door for at least 60 seconds and cut power, then check for foil or other material over a vent or air passage, and remove it.
Owner checks firstC-30 on a Dacor oven means the PCB sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds and reconnect, then book a technician if the sensor code reappears.
Reset, then bookC-31 on a Dacor oven means the PCB temperature rose abnormally high. The only action printed is to call for service, so turn the oven off and book a visit.
TechnicianC-70 on a Dacor steam oven means the steam sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds, then call us if the steam code reappears.
Reset, then bookC-72 on a Dacor steam oven means there are drain system problems. Restart, cut power for at least 30 seconds, then call us if the drain code reappears.
Reset, then bookC-A2 on a Dacor oven means the cooling motor is operating abnormally. The guides print one action, call for service, so turn the oven off and book a visit.
TechnicianC-d0 on a Dacor Modernist wall oven or Transitional range means a control key was held down or shorted for 1 minute. Clean the buttons, make sure no water sits on or around them, turn the oven off and try again.
Owner checks firstC-d1 on a Dacor oven means the door lock is mispositioned. Restart the oven, and if the lock code returns, cut all power for 30 seconds or longer and reconnect. If it still shows, book a technician.
Reset, then bookC-F0 on a Dacor oven means communication between the Main and Sub PBA, the circuit boards, was interrupted. Restart, cut all power for 30 seconds, and call us if the board code reappears.
Reset, then bookC-F2 on a Dacor oven means communication between the Main board and the Touch control panel was interrupted. Restart and cut power for half a minute; if the panel code is still there, call us.
Reset, then bookOn a Dacor Heritage wall oven (HWO127, HWO130, HWO227, HWO230), C33 can appear when the door stays open during cooking or broiling. Let the oven cool so C33 resets, and do not leave the door open for long while broiling.
Owner checks firstWire installation fail on a Dacor Transitional 36-inch range means the power cord is installed improperly. Cut power at the breaker and book a visit; the cord belongs on the terminal block only for a qualified installer.
Electrician firstNot every code appears in every line: C-22 and C-24 are Transitional range rows, C-70 and C-72 are steam rows, and the 48-inch range omits C-d0. No Dacor oven manual we read prints F0 to F8, C01, C25, C35, C41, C42 or C76.

We decode C33 on Heritage wall ovens, and C-d0 to C-A2 on the Modernist wall oven, the Transitional ranges and the Modernist 48-inch range, naming the model line each row belongs to.
Not every code appears in every line: C-22 and C-24 are Transitional range rows, C-70 and C-72 are steam rows, and the 48-inch range omits C-d0. No Dacor oven manual we read prints F0 to F8, C01, C25, C35, C41, C42 or C76.
Give the model line (Heritage, Modernist or Transitional), the exact code with its dash and the model number. The restart key differs between lines.
If you smell gas, do not light anything or touch a switch; leave and call your gas supplier from outside. Switch the oven off at the breaker before going near wiring or a panel.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
When a Dacor oven door stays shut, it is usually locked on purpose: during self-cleaning, or by Control Lockout on a Modernist after a power cut. Wait for the lock to release, or follow the lockout steps. C-d1 and C33 are the door-related codes.
For a Heritage wall oven that will not turn on, the manual lists no power connection, a breaker that tripped or a fuse that blew, a locked control panel, and a power outage. Touch CANCEL/SECURE for 6 seconds to unlock the panel before anything else.
Rely on the guide for your precise model. Look at how we research these pages.
Not every code appears in every line: C-22 and C-24 are Transitional range rows, C-70 and C-72 are steam rows, and the 48-inch range omits C-d0. No Dacor oven manual we read prints F0 to F8, C01, C25, C35, C41, C42 or C76.
Take a photo of the entire oven panel and one of the rating label. Write down what the appliance was doing when the message came up, and never lean on another product's explanation.
An old search phrase counts for nothing next to the manufacturer's own words. If a oven document gives no decoding, the message appears under its name with no part or cause guessed at.
Open any manufacturer document in this oven library, then match the model on its cover to the label on your appliance. A different model has its own guide.