What it means
C-24 on a Dacor Transitional range means the oven vent is blocked. Open the door for at least 60 seconds and cut power, then check for foil or other material over a vent or air passage, and remove it.
Dacor oven C-24 / Airflow
C-24 on a Dacor Transitional range means the oven vent is blocked. Open the door for at least 60 seconds and cut power, then check for foil or other material over a vent or air passage, and remove it.
Also shown as C-24
C-24 on a Dacor Transitional range means the oven vent is blocked. Open the door for at least 60 seconds and cut power, then check for foil or other material over a vent or air passage, and remove it.
To reset, disconnect power or press Off after opening the oven door for at least 60 seconds.
C-24 returns after the vents and air passages are clear.
Your Dacor tick-list / held on this device

To reset, disconnect power or press Off after opening the oven door for at least 60 seconds.

Check whether any oven vent or air passage is blocked by aluminum foil or other material.

Remove foil or other material from any blocked vent or air passage, once the oven has cooled.

Restore power and try the oven again. Book a visit if C-24 returns.
Tell us the model and which checks you have done, then open your request from here.
Book a visit
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
The oven vent is blocked, so hot air cannot leave the cavity properly.
Read the supporting manualAluminum foil is the one named in the guide, plus other material. Foil lining the oven bottom or covering shelves can do it.
Read the supporting manualThe guide does not link them, but C-21 is the abnormal internal temperature code and a blocked vent is a plausible reason to check first. We do not claim a link.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01458A-00, 2023-01-17 (EN+ES+FR) / p.103
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / p.55
Printed only in the Transitional 30-inch and 36-inch range guides. The wall oven and 48-inch range tables do not list C-24.
That is the guide's reset step: open the door for at least 60 seconds with power disconnected or Off pressed.
No. C-A2 is the cooling motor code. C-24 is about the oven vent or air passage being blocked by foil or other material.
The guide implies not near vents. Avoid foil over vents or air passages.
Book a visit when C-24 returns after the vents and air passages have been cleared and the oven has been reset.
Dacor codes, symptoms, parts, repairs
C-A2 on a Dacor oven means the cooling motor is operating abnormally. The guides print one action, call for service, so turn the oven off and book a visit.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.