What it means
C-A2 on a Dacor oven means the cooling motor is operating abnormally. The guides print one action, call for service, so turn the oven off and book a visit.
Dacor oven C-A2 / Cooling fan
C-A2 on a Dacor oven means the cooling motor is operating abnormally. The guides print one action, call for service, so turn the oven off and book a visit.
Also shown as C-A2
C-A2 on a Dacor oven means the cooling motor is operating abnormally. The guides print one action, call for service, so turn the oven off and book a visit.
Switch the oven off at the controls and let it cool before you leave it.
C-A2 shows at all.
Your Dacor tick-list / held on this device

Switch the oven off at the controls and let it cool before you leave it.

A cooling fan that is silent or noisy after shutdown supports the code. Do not open the oven body.

The guides print no owner step, so do not restart repeatedly.

Give us the code C-A2 and the model number when you book so the visit can be planned.
Tell us the model and which checks you have done, then open your request from here.
Book a visit
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
The cooling motor, which moves air through the oven electronics, operates abnormally.
Read the supporting manualA built-in oven needs airflow to keep the electronics cool. The guides print C-31 for an overheating board.
Read the supporting manualNo. The induction cooktop A2 is a fan motor message on a different Dacor product.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 112177 Rev B / DG68-00920A-00 / p.64 (Abnormal cooling motor function)
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01458A-00, 2023-01-17 (EN+ES+FR) / p.103
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / p.55
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 115113 Rev A / p.71 (Problem with cooling motor)
Printed in all four guides, with call for service as the only action.
The guides advise service only for C-A2, so do not rely on the oven. A cooling motor that fails can let the electronics overheat.
C-24 covers a blocked vent on the Transitional ranges. C-A2 names the motor.
The guides give no reset for C-A2, only the instruction to call for service, so book a visit instead of waiting.
The code C-A2, the model and any noise from the fan area, plus whether the oven also showed C-31.
Dacor codes, symptoms, parts, repairs
C-24 on a Dacor Transitional range means the oven vent is blocked. Open the door for at least 60 seconds and cut power, then check for foil or other material over a vent or air passage, and remove it.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.