What it means
C-d1 on a Dacor oven means the door lock is mispositioned. Restart the oven, and if the lock code returns, cut all power for 30 seconds or longer and reconnect. If it still shows, book a technician.
Dacor oven C-d1 / Door lock
C-d1 on a Dacor oven means the door lock is mispositioned. Restart the oven, and if the lock code returns, cut all power for 30 seconds or longer and reconnect. If it still shows, book a technician.
Also shown as C-d1
C-d1 on a Dacor oven means the door lock is mispositioned. Restart the oven, and if the lock code returns, cut all power for 30 seconds or longer and reconnect. If it still shows, book a technician.
Do not pull on the door.
C-d1 returns after a restart and a 30-second power cut.
Your Dacor tick-list / held on this device

Do not pull on the door. A mispositioned lock may keep it shut or leave it loose.

Press OFF and restart the oven to see whether the lock code clears.

If it returns, disconnect all power for at least 30 seconds and reconnect.

The lock motor and switch are inside the oven. Quote C-d1.
Tell us the model and which checks you have done, then open your request from here.
Book a visit
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Component reference
A Dacor wall oven holds its door shut during self-cleaning, and the Modernist Control Lockout locks the door along with the touchpad.
Read the definitionThe door lock is not in the position the oven expects. The guide gives no cause.
Read the supporting manualNo. A door that will not open after a power failure is Control Lockout in the Modernist manual, a separate topic.
Read the supporting manualC-F0, C-F2 and C-20 share the same solution cell in some guides.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 112177 Rev B / DG68-00920A-00 / p.64 (Door lock mispositioned)
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01458A-00, 2023-01-17 (EN+ES+FR) / p.102
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / p.54
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 115113 Rev A / p.71
Printed in all four Samsung-era Dacor tables: Modernist wall oven (p.64), Transitional 30-inch (p.102) and 36-inch (p.54), Modernist 48/36-inch range (p.71). The solution cell is shared with C-F0, C-F2 and C-20.
Try gently. Never force it, because a mispositioned lock can leave the door held or loose and forcing risks damage.
The guides do not say whether the oven still bakes with C-d1. Avoid using it until the lock has been checked.
Yes. The oven door lock is listed as a part, and a technician checks its motor and switch.
Book a visit when C-d1 returns after a restart and a power cut of at least 30 seconds.
Dacor codes, symptoms, parts, repairs
C-F0 on a Dacor oven means communication between the Main and Sub PBA, the circuit boards, was interrupted. Restart, cut all power for 30 seconds, and call us if the board code reappears.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
A Dacor wall oven holds its door shut during self-cleaning, and the Modernist Control Lockout locks the door along with the touchpad. After a power cut while the door was locked, the Modernist manual says to switch Control Lockout on and then unlock it. The Heritage manual ties code C33 to an open door.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.