What it means
C-70 on a Dacor steam oven means the steam sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds, then call us if the steam code reappears.
Dacor oven C-70 / Steam system
C-70 on a Dacor steam oven means the steam sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds, then call us if the steam code reappears.
Also shown as C-70
C-70 on a Dacor steam oven means the steam sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds, then call us if the steam code reappears.
Press OFF at the controls and start the oven again to see whether C-70 clears.
C-70 returns after a restart and a 30-second power cut.
Your Dacor tick-list / held on this device

Press OFF at the controls and start the oven again to see whether C-70 clears.

If C-70 persists, disconnect all power for at least 30 seconds and reconnect.

Make sure the steam reservoir is seated and filled as the guide describes. The guide does not name this as a cause.

Give us the code C-70 and the model number when you book so the visit can be planned.
Tell us the model and which checks you have done, then open your request from here.
Book a visit
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Component reference
Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking.
Read the definitionThe steam sensor circuit is open or short. It is printed only for steam models.
Read the supporting manualThe Modernist wall oven DOB30M977, the Transitional 36-inch DOP36P86DL and the Modernist 48/36-inch steam range. Not the Transitional 30-inch.
Read the supporting manualC-72 is a drain system problem. C-70 is the steam sensor. They share one solution cell.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 112177 Rev B / DG68-00920A-00 / p.64
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / p.55
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 115113 Rev A / p.71
Steam models only: the Modernist wall oven DOB30M977, the Transitional 36-inch DOP36P86DL* and the Modernist 48/36-inch steam range. Not printed in the Transitional 30-inch guide.
The guide names a sensor circuit, not water. C-72 is the drain code.
The guide does not say whether the oven bakes normally with C-70. Do not rely on it until the steam sensor has been checked.
The guide does not link descaling to C-70. It names a steam sensor circuit that is open or short.
When C-70 returns after a restart and a power cut of 30 seconds.
Dacor codes, symptoms, parts, repairs
C-72 on a Dacor steam oven means there are drain system problems. Restart, cut power for at least 30 seconds, then call us if the drain code reappears.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking. The 48-inch holds up to 1500 ml and the 36-inch up to 650 ml. Empty it afterward so leftover water does not affect other modes. Steam sensor and drain problems print as C-70 and C-72.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.