What it means
C-72 on a Dacor steam oven means there are drain system problems. Restart, cut power for at least 30 seconds, then call us if the drain code reappears.
Dacor oven C-72 / Steam system
C-72 on a Dacor steam oven means there are drain system problems. Restart, cut power for at least 30 seconds, then call us if the drain code reappears.
Also shown as C-72
C-72 on a Dacor steam oven means there are drain system problems. Restart, cut power for at least 30 seconds, then call us if the drain code reappears.
Press OFF and let the oven cool before touching the reservoir.
C-72 returns after a restart and a 30-second power cut.
Your Dacor tick-list / held on this device

Press OFF and let the oven cool before touching the reservoir.

Look for water in the cavity or around the reservoir. Do not open panels.

If C-72 persists after a restart, disconnect all power for at least 30 seconds.

Give us the code C-72 and the model number when you book so the visit can be planned.
Tell us the model and which checks you have done, then open your request from here.
Book a visit
This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Component reference
Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking.
Read the definitionThere are problems with the drain system of the steam oven. The guide gives no more detail.
Read the supporting manualThe Modernist wall oven, the Transitional 36-inch steam range and the Modernist 48/36-inch steam range. Not the Transitional 30-inch.
Read the supporting manualThe guide does not say. Standing water is a reason to switch off at the breaker.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 112177 Rev B / DG68-00920A-00 / p.64 (Drain system problems)
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DG68-01105E-00, 2020-07-06 (EN+ES+FR) / p.55
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part No. 115113 Rev A / p.71 (Problem with drain system)
Steam models only: the Modernist wall oven, the Transitional 36-inch and the Modernist 48/36-inch steam range. Not in the Transitional 30-inch guide.
No. C-70 is a steam sensor that is open or short. C-72 is a drain system problem. They share one printed solution.
The guide describes no drain procedure for C-72. Do not open panels or tip the reservoir; book a visit instead.
Do not run steam until the drain system has been checked, since water may not be leaving the cavity as it should.
Book a visit when C-72 returns after the restart and a power cut of at least 30 seconds.
Dacor codes, symptoms, parts, repairs
C-70 on a Dacor steam oven means the steam sensor is open or short while the oven operates. Restart, cut power for at least 30 seconds, then call us if the steam code reappears.
The Heritage wall oven manual lists three owner causes for an oven that will not heat: a wrong temperature setting, a delayed start left on, and a meat probe still plugged in when you broil. Check those in that order, then look at the display for a C- code.
Dacor steam ranges draw water from a removable reservoir that you fill with tap water before steam cooking. The 48-inch holds up to 1500 ml and the 36-inch up to 650 ml. Empty it afterward so leftover water does not affect other modes. Steam sensor and drain problems print as C-70 and C-72.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.