Dacor dishwasher 1C / Water level

Dacor dishwasher
error 1C

Dishwasher / display reference1C

The low-water level check is what 1C stands for on the DDW24G9000AP. Check whether the filter is clogged, use dishwasher detergent, load dishes evenly, then turn the dishwasher off and on and try again. A technician visit is next if it continues.

Also shown as 1C

Last reviewed

Dishwasher / display reference1C
Meaning
The low-water level check is what 1C stands for on the DDW24G9000AP. Check whether the filter is clogged, use dishwasher detergent, load dishes evenly, then turn the dishwasher off and on and try again. A technician visit is next if it continues.
Who handles it
Owner checks first, then a technician
Related codes
Source
User Manual, Built-In Dishwasher DDW24G9000AP

What Dacor dishwasher 1C means.

What it means

The low-water level check is what 1C stands for on the DDW24G9000AP. Check whether the filter is clogged, use dishwasher detergent, load dishes evenly, then turn the dishwasher off and on and try again. A technician visit is next if it continues.

What you can safely check

The first item in the manual is a clogged filter.

When to call a technician

1C returns after the filter is cleaned and the load is evened.

Your Dacor tick-list / held on this device

Safe checks, in order.

0 of 4 checks done
  1. Dacor dishwasher 1C: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Clean the filter

    The first item in the manual is a clogged filter. Take it out, rinse it and refit it so it is correctly fastened.

  2. The control panel of a Modernist wall oven
    Illustration. Follow your model’s instructions.
    Check 2

    Use dishwasher detergent

    Make sure you use detergent made for dishwashers, not hand dish soap, which foams and can upset the water level.

  3. Over-the-shoulder view of a technician holding a tablet with a blank checklist, a stainless dishwasher behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Load the dishes evenly

    The manual asks you to make sure the dishes are loaded evenly, so spray arms and sensors are not blocked.

  4. A technician testing a wall oven component
    Illustration. Follow your model’s instructions.
    Check 4

    Power-cycle and retry

    Turn the dishwasher off, turn it on again and run a cycle. Book a visit if 1C returns.

Still showing 1C?

Tell us the model and which checks you have done, then open your request from here.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Parts behind the message.

Round coarse filter and a slim cylindrical micro filter on a white towel beside an open dishwasher.

Component reference

Dishwasher coarse and micro filters

The Dacor DDW24G9000AP has a coarse filter and a cylindrical micro filter under it, locked by a handle in the tub floor.

Read the definition

A little more context.

What does 1C mean?

1C is the low-water level check. The dishwasher judged the water level too low during a cycle.

Read the supporting manual

Why does the filter matter?

A clogged filter is the first thing the manual lists. The troubleshooting chapter also says to clean the filter at least once a month.

Read the supporting manual

How is it different from 4C?

4C is the water supply check, for a closed valve or a frozen line. 1C is about the level inside the dishwasher once a cycle is running.

Read the supporting manual

The manual behind the message.

Manufacturer document

User Manual, Built-In Dishwasher DDW24G9000AP

Dacor (Dacor-branded document hosted on image-us.samsung.com)

DD68-00250L-00 (DW8700B), 2024-01-11 / PDF p.75

For 1C: the Dacor built-in dishwasher DDW24G9000AP. Source is the information codes table and the dishwasher troubleshooting and installation chapters of its user manual; other Dacor dishwashers are not covered.

Here to help

Good questions.
Clear answers.

Talk to our team
Can hand soap cause 1C?

The manual says to make sure dishwasher detergent is used. It does not name hand soap, but dishwasher detergent is the printed requirement.

How often should I clean the filter when 1C shows?

At least once per month, according to the troubleshooting chapter, and when the filter looks clogged.

Will turning it off and on clear 1C?

It is a step in the manual. If the cause was a one-off, the code may not return. If 1C returns, book a visit.

What should I tell the technician when 1C shows?

Which cycle was running, how the load was arranged and whether the filter was clean when 1C appeared.

Let’s take care of it.

See a C-code?
Tell us the number.