Inside the appliance

Dishwasher water inlet valve. In plain English.

Hot water enters the Dacor DDW24G9000AP through its dishwasher water inlet valve, fed by a 3/4-inch 90-degree fitting. The manual prints 4C for a frozen line or one blocked with debris. Confirm the house shutoff is open before booking a visit.

Last reviewed

Braided stainless dishwasher supply hose and a brass elbow fitting on a towel in front of a built-in dishwasher
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Dishwasher water inlet valve in the appliance

At the base of the dishwasher, where a 90-degree fitting points toward the water-hose channel.

The photo shows the type of component. It cannot tell you which replacement fits your model.

Owner care, within the model instructions.

Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.

  1. 1

    Open the supply valve

    For 4C, first see whether the house shutoff is closed or the supply to the home is interrupted.

  2. 2

    Look for a frozen or clogged line

    The 4C row also points at ice in the inlet valve or hose, or debris blocking either.

  3. 3

    Check the fitting for leaks

    In the leak procedure, a dripping inlet valve means the 90-degree fitting was seated badly on the hot water line, so it gets reconnected.

  4. 4

    Check the supply temperature

    Installation calls for supply water at 120 to 149 degrees F and line pressure of 20 to 120 psi.

  5. 5

    Shut the valve for leaks

    Shut the house shutoff and turn the dishwasher breaker off before going near a leak.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit when 4C comes back with the house shutoff open and the hose free of ice and debris.

Book a technician when the fitting still drips after being reconnected.

Arrange a diagnostic

Sources and model boundaries.

The Dishwasher water inlet valve guidance is built on these references. Choose the manual for your own model.

  • Installation and User Manual, 24-inch Dishwasher DDW24G9000AP

Rely on the guide for your precise model. Look at how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does 4C mean on a Dacor dishwasher?

The DDW24G9000AP manual titles it a water supply check. Look at the house shutoff and the supply, then at ice or debris in the inlet valve or hose.

How hot should the supply water be?

Installation calls for water between 120 and 149 degrees F at 20 to 120 psi line pressure.

What if the inlet valve leaks?

The manual puts it down to a badly seated 90-degree fitting on the hot water line. Reconnect it and dry the leakage sensor before another cycle.

Which water line connects to the valve?

The hot water line, joined through a 3/4-inch 90-degree fitting threaded into the valve.

Let’s take care of it.

See a C-code?
Tell us the number.