Dacor dishwasher LC / Leak

Dacor dishwasher
error LC

Dishwasher / display referenceLC

Leakage check is the meaning of LC on this Dacor dishwasher, the DDW24G9000AP. Shut the water supply valve and set the dishwasher breaker to off. Do not run it again until the leak is dealt with; the manual refers the repair to the installer.

Also shown as LC

Last reviewed

Dishwasher / display referenceLC
Meaning
Leakage check is the meaning of LC on this Dacor dishwasher, the DDW24G9000AP. Shut the water supply valve and set the dishwasher breaker to off. Do not run it again until the leak is dealt with; the manual refers the repair to the installer.
Who handles it
Technician — close the water supply
Related codes
Source
User Manual, Built-In Dishwasher DDW24G9000AP

What Dacor dishwasher LC means.

What it means

Leakage check is the meaning of LC on this Dacor dishwasher, the DDW24G9000AP. Shut the water supply valve and set the dishwasher breaker to off. Do not run it again until the leak is dealt with; the manual refers the repair to the installer.

What you can safely check

Standing water near outlets is a shock risk.

When to call a technician

LC appears, puddles have formed, or LC returns once water and power are restored.

Your Dacor tick-list / held on this device

Safe checks, in order.

0 of 4 checks done
  1. Dacor dishwasher LC: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Close the water supply valve

    Shut the valve right away to stop any further water entering.

  2. The control panel of a Modernist wall oven
    Illustration. Follow your model’s instructions.
    Check 2

    Switch the breaker off

    Go to your breaker panel and set the dishwasher circuit to off.

  3. Over-the-shoulder view of a technician holding a tablet with a blank checklist, a stainless dishwasher behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Check for leaks

    Look at the inlet valve and hose connections. The installation chapter says to reconnect the 90-degree fitting with the hot water line if the inlet valve leaks.

  4. A technician testing a wall oven component
    Illustration. Follow your model’s instructions.
    Check 4

    Do not run it again

    Wait until the leak has been fixed. If LC continues after a fix, book a visit.

Still showing LC?

Tell us the model and which checks you have done, then open your request from here.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Parts behind the message.

Coiled gray corrugated dishwasher drain hose with a clamp on a cabinet floor beside a flashlight.

Component reference

Dishwasher drain hose

The drain hose is the exit path for used wash water.

Read the definition

A little more context.

How do I clear LC after a leak?

The installation chapter says: press and hold Start for more than 3 seconds to drain, unplug, close the valve, stop the leak, wipe moisture off the leak sensor, then plug in, open the valve and start a cycle.

Read the supporting manual

Who fixes the leak?

The manual says to contact the installer. We can check the dishwasher side and the connections; plumbing is the installer's.

Read the supporting manual

The manual behind the message.

Manufacturer document

User Manual, Built-In Dishwasher DDW24G9000AP

Dacor (Dacor-branded document hosted on image-us.samsung.com)

DD68-00250L-00 (DW8700B), 2024-01-11 / PDF p.74 (Information codes)

For LC: the Dacor built-in dishwasher DDW24G9000AP. Source is the information codes table and the dishwasher troubleshooting and installation chapters of its user manual; other Dacor dishwashers are not covered.

Here to help

Good questions.
Clear answers.

Talk to our team
Is LC dangerous?

Water and electricity do not mix, so cut both first. That is why the manual starts with the valve and the breaker.

Can the dishwasher drain itself with LC?

Yes. The installation chapter says to hold Start for over 3 seconds to start draining when LC shows.

Why wipe the leak sensor?

The sensor stays wet after a leak and may keep LC on. The manual says to wipe moisture from the water leakage sensor.

When do I book when LC shows?

When LC appears, puddles have formed, or LC returns once water and power are restored.

Let’s take care of it.

See a C-code?
Tell us the number.