Inside the appliance
Dishwasher drain hose. In plain English.
The drain hose is the exit path for used wash water. The Dacor manual lists a folded or clogged hose when water remains after a cycle, and an obstructed hose for bad odors. It sends obstruction removal to a technician. An LC reading means shutting the water and the breaker off.

Where it fits.
Dishwasher drain hose in the appliance
Behind the dishwasher, out of sight. You only see its effects: water standing in the tub or odors.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A Dishwasher drain hose concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Look for a kink
A folded or clogged drain hose is named for water that sits in the tub after a cycle. Straighten it and clear it if you can reach it.
- 2
Run a cleaning cycle
For odors from leftover water, add detergent to the empty tub and run the Normal cycle.
- 3
Try the vinegar glass
If the dishwasher is not used daily or soiled dishes sit too long, stand a glass of 8 ounces of vinegar upright in the lower rack with no detergent and run Normal.
- 4
Shut the water if it leaks
LC means a leak check. Close the supply valve and switch the dishwasher breaker off, as the code table says.
Cleaning or replacement?
Leave internal testing to a technician.
Schedule a visit when water remains after the hose is straight and the filters are clean.
Schedule a visit when odors persist after the cleaning cycle.
Shut off the water and the breaker first if LC shows.
Arrange a diagnosticSources and model boundaries.
The Dishwasher drain hose guidance is built on these references. Choose the manual for your own model.
- User Manual, Built-In Dishwasher DDW24G9000AP
Rely on the guide for your precise model. Look at how we research these pages.
Why does my Dacor dishwasher hold standing water?
The DDW24G9000AP table names a folded or clogged drain hose. Straighten and unclog it, and have a technician look if the tub stays wet.
Can I clear a blocked drain hose myself?
The manual says to straighten and unclog a folded hose. For an obstruction, it points to a qualified technician.
What does LC mean?
The manual prints it as a leakage check. Close the water supply valve and switch off the dishwasher breaker. See the LC code page for the exact steps.
Why does my dishwasher smell?
The table lists leftover water, an obstructed hose, or infrequent use. Run a Normal cycle with detergent, or the vinegar-glass cycle, and have a technician check if the smell stays.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
LC
Leakage check is the meaning of LC on this Dacor dishwasher, the DDW24G9000AP. Shut the water supply valve and set the dishwasher breaker to off. Do not run it again until the leak is dealt with; the manual refers the repair to the installer.
Dacor dishwasher will not start
On a Dacor DDW24G9000AP, the manual lists a door not fully latched, the upper rack not joined to its duct nozzle, Start (Reset) not pressed, no cycle chosen, an unplugged cord, and a closed water valve. Run those six checks before calling.
Dishwasher repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

