Start from the symptom
Dacor range burner will not light.
On a Dacor Pro-Range, a burner that stays dark has a short suspect list: no power to the igniter, a knob not pushed in to Lite, burner caps off or out of line, or dirty electrodes. A gas odor overrides everything else: get out and ring the gas utility from a neighbor's house.

Start with safe observations.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Gas odor first
With a gas odor present, turn every knob to off, walk out, and phone the gas utility from next door. Skip your own phone indoors, since a spark could ignite the gas.
- 2
Look at the power
With no burner lighting at all, the chart lists an unplugged cord, a fuse that blew, a tripped breaker, and a gas supply that is off or wrongly connected.
- 3
Push and turn
Push the knob in, then rotate it to Lite.
- 4
Seat the caps
A burner cap not in place, or a burner base out of line, stops ignition. Set the cap on its head and align the base.
- 5
Clean the electrodes
Dirty electrodes are in the same row as misaligned caps. Clean them, and clean the burner parts if a flame looks yellow or very large.
More about this symptom.
What stops every burner at once?#
Anything upstream of the burners: the range is unplugged, a fuse blew or a breaker tripped, or the gas supply is off or poorly connected. Dacor sends gas hookup questions to the installation instructions. 1
What stops just one burner?#
Caps and bases. Caps left off, a crooked base and dirty electrodes make up Dacor's burner row. Seat, align and clean, then try again. 1
Is a clicking burner dangerous?#
A click while the knob sits on ignite is the igniter doing its job. After the burner lights, move the knob to the desired level. Continued clicking after that deserves a visit. 1
What about flame color?#
A very large or yellow flame points to dirty burner parts, or to the wrong gas type, such as propane versus natural gas. Clean the burner components first. 1
Systems a technician may investigate.
These parts are tied to the symptom. Seeing it does not show that any one of them has failed.
If the display adds a code.
Keep the exact message.
Code meanings for this appliance are outside our research so far. Rely on its model manual and attach a photo of the panel to your request.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
A gas odor appears at any point.
Only one burner refuses to light after the cap, base and electrodes are cleaned.
The burner keeps clicking after it ignites.
The flame is large or yellow after cleaning.
Arrange a diagnosticSources and model boundaries.
The Dacor range burner will not light guidance is built on these references. Choose the manual for your own model.
- User Manual, Pro-Range HDPR30*, HDPR36*, HDPR48*
Rely on the guide for your precise model. Look at how we research these pages.
Why will none of the burners on my Dacor range light?
Dacor's chart lists an unplugged cord, a fuse that blew, a tripped breaker, and a gas supply that is off or improperly connected. Check those three before touching the burners.
Why does one burner not light?
Look for a cap that is not in place, a base that is out of line, or dirty electrodes. Put the cap on the head, align the base and clean the electrodes.
Why does the burner keep clicking?
If the knob is set on ignite, the igniter keeps firing. Once the flame catches, turn the knob to your setting; if it still clicks, a service visit is warranted.
What should happen if gas is smelled?
Switch off every knob, get everyone outside, and ring the gas utility from a neighbor's house so your phone cannot spark. Follow its directions.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
Dacor range burner will not light
On a Dacor Pro-Range, a burner that stays dark has a short suspect list: no power to the igniter, a knob not pushed in to Lite, burner caps off or out of line, or dirty electrodes. A gas odor overrides everything else: get out and ring the gas utility from a neighbor's house.
Range surface burner
A Dacor Pro range burner is a head, a cap and an igniter electrode on a fixed base. The Heritage Pro manual blames a missing cap, a misaligned base or dirty electrodes when a burner refuses to light. Gas smell is a different case: leave the building, then call the gas supplier from outside.
Range repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

