Inside the appliance
ConnectOn Bluetooth link. In plain English.
ConnectOn links a Dacor hood by Bluetooth to a compatible Dacor cooking product. While connected, the hood fan starts on its own when you turn on a burner or element and shuts off when you turn it off. Fan turn-ons you did not expect usually trace to this link or to the auto-on feature.

Where it fits.
ConnectOn Bluetooth link in the appliance
On the hood's control panel, with a Bluetooth icon on its display. The partner key sits on the cooktop or range panel.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A ConnectOn Bluetooth link concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.

Dacor range burner will not light
On a Dacor Pro-Range, a burner that stays dark has a short suspect list: no power to the igniter, a knob not pushed in to Lite, burner caps off or out of line, or dirty electrodes. A gas odor overrides everything else: get out and ring the gas utility from a neighbor's house.

Dacor range oven stays off or ignores the controls
A Pro-Range oven that stays off or ignores the controls is usually a power, lockout or moisture matter: unplugged, fuse or breaker, an oven that is too hot, a control lockout, or damp residue on the panel.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Know the fan speed
With ConnectOn active, the fan starts at Auto speed if Auto was last enabled, and at Low if it was disabled.
- 2
Turn it off
If the fan comes on by itself, press POWER to turn the fan off, or press ConnectOn again to deactivate the link.
- 3
Reset the Bluetooth
If the Bluetooth light blinks or shuts off, the troubleshooting table says to hold Light and ConnectOn for 5 seconds.
- 4
Check the pairing partner
Only a compatible Dacor cooktop or range can pair with the hood, so a different brand will not connect.
Cleaning or replacement?
Leave internal testing to a technician.
Schedule a visit when the fan turns on by itself with ConnectOn off, since the table says to disconnect power and call for service.
Schedule a visit when the hood will not pair after the reset.
Arrange a diagnosticSources and model boundaries.
The ConnectOn Bluetooth link guidance is built on these references. Choose the manual for your own model.
- Use and Care, Pro-Canopy Wall Hood DHD**U990C*/DA, Chimney Wall Hood DHD**U990W*/DA, Chimney Island Hood DHD**U990I*/DA
Rely on the guide for your precise model. Look at how we research these pages.
Why does my hood turn on by itself?
The guide lists ConnectOn started, or the auto-on feature working when heat is sensed. It says press POWER to turn the fan off, and the auto feature turns off when heat cools.
How do I pair my hood with my cooktop?
Press ConnectOn on the hood for 3 seconds, and then press the Bluetooth button on the cooking product. The Bluetooth light stays lit when paired.
Can I pair it with another brand?
No. The table says only a Dacor compatible cooktop can be paired with the hood.
How do I disconnect the pairing?
Hold ConnectOn and Light together on the hood for 3 seconds. The Bluetooth connection drops.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
Dacor Pro-Canopy hood dead or lights out
When a Dacor Pro-Canopy hood does nothing, the chart separates three cases by what still works: nothing at all, lights dead with a working fan, and a fan that is dead while the panel and lights work.
Hood repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

