Inside the appliance

Freezer auto door open system. In plain English.

Dacor column freezers have an auto door open system that opens the door with mechanical help when you push the handle. Touching or snapping does not trigger it. The manual lists the switch as factory off, a one-minute wait between uses, and a paired column that may pop open when the neighboring door closes.

Last reviewed

A hand pulls the long handle of a tall stainless freezer door, which stands open a few inches showing stacked containers.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Freezer auto door open system in the appliance

At the door and handle of the freezer column. The manual describes a mechanical device and a switch but shows no diagram of it.

The photo shows the type of component. It cannot tell you which replacement fits your model.

Owner care, within the model instructions.

Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.

  1. 1

    Turn the switch on

    The troubleshooting table says to turn on the Auto Door Open switch, as the factory setting is off.

  2. 2

    Wait a minute

    If you try again right after using it, the system may not work. It returns to normal within 1 minute.

  3. 3

    Push the handle

    Push the door handle. Touching or snapping the door does not trigger it.

  4. 4

    Do not close the door early

    The manual warns that closing the door during the opening movement could damage the kit.

Cleaning or replacement?

Leave internal testing to a technician.

Schedule service when the door will not open with the switch on and a full minute of waiting.

Schedule service when the door catches, scrapes or stays open after the system runs.

Schedule service when a paired column keeps opening on its own after the units are fixed tight.

Arrange a diagnostic

Sources and model boundaries.

The Freezer auto door open system guidance is built on these references. Choose the manual for your own model.

  • User Manual, Built-In Freezer DRZ18980*** / DRZ24980*** / DRZ30980*** / DRZ30990*** / DRZ36980***

Rely on the guide for your precise model. Look at how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why will my freezer door not open by itself?

The switch may be off, which is the factory setting, or you used it less than a minute ago. Wait one minute and try again gently.

Why did the other door open when I closed this one?

On paired columns, closing one door can trigger the other’s door sensor. The manual says that is not a system failure, and the Auto Close system shuts it.

Does touching the handle open it?

No. You push the handle. The manual says touching or snapping does not trigger the system.

Can I close the door during opening?

Avoid it. Closing the door early during the auto door system could cause kit damage.

Let’s take care of it.

See a C-code?
Tell us the number.