Inside the appliance

Refrigerator water filter. In plain English.

Dacor column and side-by-side units track the water filter with a Filter indicator that turns red or blinks. The column manuals give about 6 months or 300 gallons, then a 3-second hold on Filter Reset. Weak water flow can also mean a clogged filter even when the light is off.

Last reviewed

White water filter cartridge half-turned out of its housing inside a built-in refrigerator with a blue light above.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Refrigerator water filter in the appliance

Inside the cabinet, where the manuals do not map the housing. The Filter indicator and Filter Reset key are on the control panel.

The photo shows the type of component. It cannot tell you which replacement fits your model.

Owner care, within the model instructions.

Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.

  1. 1

    Swap the filter

    When the indicator blinks red, replace the filter. The side-by-side manual says to use only Dacor-provided or approved filters because other filters may leak.

  2. 2

    Hold Filter Reset

    After the new filter is in, press and hold Filter Reset for 3 seconds to restart the filter clock and turn the indicator off.

  3. 3

    Know hard water shortens it

    Water with a lot of lime can shorten the life. In those areas change the filter more often than the stated 6 months.

  4. 4

    Check pressure

    Water flow weaker than normal can mean pressure outside the 20 to 120 psi range printed in the manual.

Cleaning or replacement?

Leave internal testing to a technician.

Schedule a visit when no water comes out even after an approved new filter and a reset.

Schedule a visit when water seeps out around the filter.

Arrange a diagnostic

Sources and model boundaries.

The Refrigerator water filter guidance is built on these references. Choose the manual for your own model.

  • User Manual, Built-In Fridge DRR24980*** / DRR30980*** / DRR30990*** / DRR36980***
  • User Manual, Built-In Refrigerator DYF42SBI***
  • User Manual, Built-In Freezer DRZ18980*** / DRZ24980*** / DRZ30980*** / DRZ30990*** / DRZ36980***

Rely on the guide for your precise model. Look at how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How often does a Dacor refrigerator water filter need changing?

The column manuals say about 6 months, which is typically 300 gallons. Lime in the water can shorten that.

Why is no water coming out?

The manuals list a water line not connected, a supply that is off, or a clogged filter. They say to replace the filter even if the indicator is not blinking.

Can I use any water filter?

The side-by-side manual says use only Dacor-provided or approved filters. It warns that unapproved filters can leak and damage the refrigerator.

How do I reset the Filter indicator?

Hold Filter Reset for 3 seconds after fitting the new filter. The red indicator goes off.

Let’s take care of it.

See a C-code?
Tell us the number.