Inside the appliance
Microwave control panel and Child Lock. In plain English.
Dacor’s DMO30U970S manual gives three reasons the touch buttons may not respond: the Child Lock is on, moisture sits on the exterior, or foreign matter is caught between the buttons. A display without the time can also mean the Eco power-saving mode is set.

Where it fits.
Microwave control panel and Child Lock in the appliance
The touch panel on the front of the microwave. The manual’s button diagrams are on PDF p.16–17.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A Microwave control panel and Child Lock concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.

Dacor microwave will not start or has no power
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.

Dacor microwave not heating or sparking
A Dacor microwave that does not heat or heats weakly is often overloaded or using the wrong cookware: Dacor's test is one cup of water for 1 to 2 minutes. Sparks come from metal containers.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Turn off the Child Lock
The manual says to touch and hold the More Functions button until the lock function is deactivated.
- 2
Dry and clear the panel
For touch models the table says to wipe moisture from the exterior. For foreign matter between the buttons, it says to remove it and try again.
- 3
Wake it from Eco mode
Eco mode darkens the display to cut standby power. The manual says touching any button cancels it.
- 4
Check power last
If the time is not displayed, the table says to make sure power is supplied and the microwave is plugged in, and to check fuses or circuit breakers.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if the panel stays unresponsive after the Child Lock is off, the panel is dry and clean, and power is confirmed.
The manual says to call Dacor Customer Service if a problem persists or an information code keeps appearing.
Arrange a diagnosticSources and model boundaries.
The Microwave control panel and Child Lock guidance is built on these references. Choose the manual for your own model.
- User Manual, Microwave Oven DMO30U970S*
Rely on the guide for your precise model. Look at how we research these pages.
How do I switch on the Child Lock?
Touch More Functions, touch ‘<’ or ‘>’ until the display shows Lock, then touch OK. To turn it off, hold More Functions.
Why is the display blank?
The manual lists two causes: no power, or Eco mode set. Touch any button to cancel Eco mode.
Do information codes appear on this model?
Yes. The manual has an information code table on PDF p.39. Read the code on the display first.
What should I check first for microwave control panel and child lock?
The manual says to touch and hold the More Functions button until the lock function is deactivated.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
Dacor microwave will not start or has no power
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.
Microwave repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

