Inside the appliance
Wine cellar racks and bottle presenters. In plain English.
Dacor wine cellar zones hold bottles on sliding wine racks, and the manual gives load limits: 100 bottles on the Type A layout and 97 on Type B. Stack bottles only on the bottom rack of the bottom zone, two rows at most, and the top rack of the middle zone. Do not pull the bottom shelf out while bottles sit on it.

Where it fits.
Wine cellar racks and bottle presenters in the appliance
Inside each zone of the wine cellar, with sliding racks on rails and the bottom wine shelf at the base of each zone.
The photo shows the type of component. It cannot tell you which replacement fits your model.
What you notice when this system wants attention.
A Wine cellar racks and bottle presenters concern can arrive with weaker performance or a code that returns. The component is only blamed after testing.

Dacor wine cellar not cold or not running
A Dacor wine cellar that does not run or sits warm has the same short cause list as Dacor's other column units: cord, temperature control, heat or sunlight nearby, tight clearance and an overloaded rack.

Dacor wine cellar odor or condensation
An odor in a Dacor wine cellar may just be the natural oak of the wooden rack. Condensation on the walls comes from a door left open. The deodorizer filter has an 18-month life that varies with use.
Owner care, within the model instructions.
Turn off and unplug the appliance before any check you can make yourself. Beware of pooled water and sharp fragments. Never touch a wet plug or live wiring, take off service panels, or go beyond what your model's guide allows.
- 1
Check how bottles are stacked
Stacking is limited to the bottom rack of the bottom zone and the top rack of the middle zone. Everywhere else, lay bottles in a single layer.
- 2
Protect large bottles
If bottles larger than standard sit on the bottom wine shelf, protect them when you pull out the rack right above, so they do not fall.
- 3
Fix presenters on the middle rack
If you use bottle presenters on the top rack of the middle zone, the rack must be fixed with a screwdriver.
- 4
Reassemble properly
Fit the front part of the rack on the rail, and the manual shows removal and refitting in order.
Cleaning or replacement?
Leave internal testing to a technician.
Schedule service when a rack will not slide, drops out of its rail or a roller is broken.
Schedule service when the rack hits the door or glass as it moves.
Schedule service when bottles shift because a rack no longer sits level.
Arrange a diagnosticSources and model boundaries.
The Wine cellar racks and bottle presenters guidance is built on these references. Choose the manual for your own model.
- User Manual, Built-In Wine Cellar DRW24980RAP/LAP
Rely on the guide for your precise model. Look at how we research these pages.
How many bottles does the cellar hold?
The load capacity table totals 100 bottles for Type A and 97 for Type B.
Where can I stack bottles?
Only on the bottom rack of the bottom zone, at most two rows, and the top rack of the middle zone.
How many bottles can I show?
The manual says up to 3 bottles can be displayed with the provided bottle presenters.
Can I pull out a loaded bottom shelf?
No. The manual says not to pull out the bottom shelf when bottles are loaded.
Dacor codes, symptoms, parts, repairs
Link the message to what you do next.
Dacor wine cellar not cold or not running
A Dacor wine cellar that does not run or sits warm has the same short cause list as Dacor's other column units: cord, temperature control, heat or sunlight nearby, tight clearance and an overloaded rack.
Wine cellar repair
Book a diagnostic for your model at the appliance itself.
Find your metro
Office details and the access notes to pass on.

