What it means
A blinking Low button on this Dacor hood is the filter alarm. It comes after every 50 hours of fan use as a nudge to clean the filters. Hold Power for three seconds once they are clean.
Dacor hood Low button blinking / Filter reminders
A blinking Low button on this Dacor hood is the filter alarm. It comes after every 50 hours of fan use as a nudge to clean the filters. Hold Power for three seconds once they are clean.
Also shown as Low button blinking
A blinking Low button on this Dacor hood is the filter alarm. It comes after every 50 hours of fan use as a nudge to clean the filters. Hold Power for three seconds once they are clean.
The manual says the appliance, filters and strip LED must have cooled and the grease solidified before cleaning.
The Low button blinks again soon after a reset.
Your Dacor tick-list / held on this device

The manual says the appliance, filters and strip LED must have cooled and the grease solidified before cleaning.

Wash the grease filters, then refit them before you cook again.

Press and hold the Power button for three seconds. The blinking stops.
The manual says not to use steam cleaners on the appliance.
Tell us the model and which checks you have done, then open your request from here.
Book a visitThis drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

Component reference
The Dacor Pro-Canopy and chimney hoods use removable filters that catch grease.
Read the definitionEvery 50 hours of fan use, the filter alarm light, which is the Low button, blinks to say the filters may need cleaning.
Read the supporting manualPress and hold Power for three seconds to reset the alarm, after you have cleaned the filters.
Read the supporting manualThe whole appliance, including the filters and strip LED, must be cool, with grease solidified, before you clean. Never use a steam cleaner.
Read the supporting manualNo. It is a reminder only, and the fan continues to work as usual.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
no edition code in the cached text / PDF p.8
Manufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
no edition code in the cached text / PDF p.6
Same guide for the Pro-Canopy and chimney wall hoods; the filter alarm shares the Low button.
Yes. The blink only shows the reminder; pressing Low still sets the low fan speed.
After every 50 hours the fan has run.
You can, but the filters collect grease regardless. The alarm is only a counter.
The manual forbids steam cleaners on the appliance, since moisture can reach the electronics.
Dacor codes, symptoms, parts, repairs
A blinking Bluetooth icon on this Dacor hood means pairing mode is running, started by a three-second hold on ConnectOn. Press the Bluetooth button on the cooktop; when pairing finishes the light stays steady.
When a Dacor Pro-Canopy hood does nothing, the chart separates three cases by what still works: nothing at all, lights dead with a working fan, and a fan that is dead while the panel and lights work.
The Dacor Pro-Canopy and chimney hoods use removable filters that catch grease. The guide warns that grease on a filter can ignite, says to clean them at least every two months, and blinks the Low button every 50 hours of fan use as a reminder. A clogged filter also weakens the fan's draw.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.