What it means
WELCOME PRESS CLEAR AND PRESS CLOCK greets you on the Dacor DMW2420S at first plug-in and after any outage. Clear the screen, set the clock, and if the outage hit mid-cook, restart the food, because the program is gone.
Dacor microwave WELCOME PRESS CLEAR AND PRESS CLOCK / Power and supply
WELCOME PRESS CLEAR AND PRESS CLOCK greets you on the Dacor DMW2420S at first plug-in and after any outage. Clear the screen, set the clock, and if the outage hit mid-cook, restart the food, because the program is gone.
Also shown as WELCOME PRESS CLEAR AND PRESS CLOCK
WELCOME PRESS CLEAR AND PRESS CLOCK greets you on the Dacor DMW2420S at first plug-in and after any outage. Clear the screen, set the clock, and if the outage hit mid-cook, restart the food, because the program is gone.
Touch Stop/Clear and a colon appears, ready for the clock.
The greeting reappears often with no outage you know of.
Your Dacor tick-list / held on this device

Touch Stop/Clear and a colon appears, ready for the clock.

Use Timer/Clock and the number 2, key the time of day, and confirm on Timer/Clock once more.

If power dropped during cooking, the program was erased. Look at the food and restart if needed.
A message that returns for no visible reason points to the supply: plug, outlet and breaker.
Tell us the model and which checks you have done, then open your request from here.
Book a visitThis drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
Power has just arrived, for the first time or after a cut, and it wants the display cleared and the clock set.
Read the supporting manualThe running program and the time of day. A program cut off in the middle of cooking is erased, per the manual.
Read the supporting manualAfter power is restored the display shows the greeting intermittently until Stop/Clear is touched.
Read the supporting manualTimer/Clock, the number 2, the time, then Timer/Clock again. It is a 12-hour clock, and a bad entry shows ERROR.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
Part 106952 Rev F, Sep 2021 / PDF p.9
The Dacor DMW2420S countertop microwave.
No. It shows after every power loss. Only a message that keeps coming back points to the supply.
A power cut erases the timer and the time of day along with any running program.
The manual says the clock must be set before functions can be used, so set it.
Not much. Demo mode names itself and the missing oven power; this one is only about the clock.
Dacor codes, symptoms, parts, repairs
The countertop Dacor DMW2420S prints DEMO ON DURING DEMO NO OVEN POWER while its demonstration mode runs: the keys answer, but nothing heats. Cancel it from the keypad, or cycle the plug.
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.