Dacor microwave DEMO ON / Mode, not a failure

Dacor microwave
error DEMO ON

Microwave / display referenceDEMO ON

The countertop Dacor DMW2420S prints DEMO ON DURING DEMO NO OVEN POWER while its demonstration mode runs: the keys answer, but nothing heats. Cancel it from the keypad, or cycle the plug.

Also shown as DEMO ON

Last reviewed

Microwave / display referenceDEMO ON
Meaning
The countertop Dacor DMW2420S prints DEMO ON DURING DEMO NO OVEN POWER while its demonstration mode runs: the keys answer, but nothing heats. Cancel it from the keypad, or cycle the plug.
Who handles it
Normal, but it will not heat
Source
Use and Care Manual, Microwave Oven DMW2420S

What Dacor microwave DEMO ON means.

What it means

The countertop Dacor DMW2420S prints DEMO ON DURING DEMO NO OVEN POWER while its demonstration mode runs: the keys answer, but nothing heats. Cancel it from the keypad, or cycle the plug.

What you can safely check

The display spells it out: the oven has no power while in demo.

When to call a technician

Heating is still missing once demo has ended.

Your Dacor tick-list / held on this device

Safe checks, in order.

0 of 4 checks done
  1. Dacor microwave DEMO ON: Built-in stainless microwave in walnut cabinetry with its door open, a glass of water on the turntable and a green display reading 30 beside the keys
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the whole message

    The display spells it out: the oven has no power while in demo. That alone tells you why nothing warms.

  2. The control panel of a Modernist wall oven
    Illustration. Follow your model’s instructions.
    Check 2

    Try Easy Minute

    In demo the display shows 1:00 and rushes down to END. A real minute takes sixty seconds.

  3. Over-the-shoulder view of a technician holding a tablet with a blank checklist, a stainless dishwasher behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Cancel from the keypad

    Use Timer/Clock, the number 0 and Stop/Clear, the sequence the manual prints for ending demo.

  4. A technician testing a wall oven component
    Illustration. Follow your model’s instructions.
    Check 4

    Use the plug if you prefer

    The manual says unplugging the oven and replugging it is an easier way out of demo mode.

Still showing DEMO ON?

Tell us the model and which checks you have done, then open your request from here.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 2Control board
  2. 4Wiring

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

A little more context.

What does this message tell me?

The oven is in demonstration mode. Cooking operations and special features can be shown, yet the oven has no power for heating.

Read the supporting manual

How is demo started?

By touching Timer/Clock, the number 0 and then holding Start for three seconds. That is how a showroom model ends up in the mode.

Read the supporting manual

What ends demo?

Timer/Clock, 0, then Stop/Clear. If easier, unplug it, give it a moment, and plug it in again.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use and Care Manual, Microwave Oven DMW2420S

Dacor (Dacor-branded document hosted on image-us.samsung.com)

Part 106952 Rev F, Sep 2021 / PDF p.22

The DMW2420S countertop model. None of the other Dacor microwave manuals we hold print a demonstration message.

Here to help

Good questions.
Clear answers.

Talk to our team
My countertop microwave runs but stays cold. Why?

If that message is on the display, it is in demo mode. End it and the heating returns.

Could a child have started it?

It takes several key steps ending in a three-second hold, so an accident is unlikely.

Is the unplug method safe?

Yes. The manual itself offers it as an easier route than the key sequence.

Does demo erase my clock?

The manual does not say. After canceling, check the time of day and reset it if needed.

Let’s take care of it.

See a C-code?
Tell us the number.