Dacor cooktop UP / Voltage

Dacor cooktop
error UP

Cooktop / display referenceUP

Input voltage that is too high or low makes the Modernist induction cooktop show UP. Check the power connection and turn the cooktop on only after the voltage is regulated, 208 V to 240 V. Book an electrician or a visit if it continues.

Also shown as UP

Last reviewed

Cooktop / display referenceUP
Meaning
Input voltage that is too high or low makes the Modernist induction cooktop show UP. Check the power connection and turn the cooktop on only after the voltage is regulated, 208 V to 240 V. Book an electrician or a visit if it continues.
Who handles it
Electrician first
Related codes
Source
User Manual, Electric Cooktop DTI36M977BB / DTI30M977BB

What Dacor cooktop UP means.

What it means

Input voltage that is too high or low makes the Modernist induction cooktop show UP. Check the power connection and turn the cooktop on only after the voltage is regulated, 208 V to 240 V. Book an electrician or a visit if it continues.

What you can safely check

Turn it off and leave it off while you look at the supply.

When to call a technician

UP continues after an electrician confirms the supply is 208 V to 240 V.

Your Dacor tick-list / held on this device

Safe checks, in order.

0 of 4 checks done
  1. Dacor cooktop UP: Cooktops in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Switch the cooktop off

    Turn it off and leave it off while you look at the supply.

  2. The control panel of a Modernist wall oven
    Illustration. Follow your model’s instructions.
    Check 2

    Check other appliances

    Flickering lights or other appliances acting up point to a household supply problem.

  3. Over-the-shoulder view of a technician holding a tablet with a blank checklist, a stainless dishwasher behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Check the breaker and connection

    Look at the breaker. Do not open the cooktop or the junction box yourself.

  4. A technician testing a wall oven component
    Illustration. Follow your model’s instructions.
    Check 4

    Call a licensed electrician

    The manual needs 208 V to 240 V at the cooktop. Have an electrician measure the supply and book us if the supply tests fine.

Still showing UP?

Tell us the model and which checks you have done, then open your request from here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.

A little more context.

When is it our job?

When the supply tests correctly at 208 V to 240 V and UP still shows, the cooktop electronics need a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

User Manual, Electric Cooktop DTI36M977BB / DTI30M977BB

Dacor (Dacor-branded document hosted on image-us.samsung.com)

Part No. 113935 Rev. A / DG68-00899A-00 (2017-03-16) / PDF p.63 (Information codes)

For UP: the Modernist induction cooktops (DTI30 and DTI36 series). Source is the Information codes table in the troubleshooting chapter of their user manual; other Dacor cooktops are not covered.

Here to help

Good questions.
Clear answers.

Talk to our team
Can UP damage the cooktop?

The manual tells you to regulate the voltage before turning the cooktop on, which suggests running it out of range is best avoided.

What voltage does it need?

208 V to 240 V, per the code table. Outside that range the cooktop shows UP and asks you to regulate the voltage first.

Is a power cut related?

The manual does not say, but a supply swing after an outage is a common reason to check voltage.

Should I keep trying?

No. Fix the supply first, then turn the cooktop on. Repeated attempts on a bad supply do not help the cooktop.

Let’s take care of it.

See a C-code?
Tell us the number.