Before work starts
The technician describes the repair and agrees the cost with you before starting. We confirm the final figure once the oven, range or cooktop has been inspected.
Independent appliance repair
We repair Dacor Modernist induction cooktops and the cooktop section of Heritage Induction ranges when zones will not heat, a pan is not detected, the keypad misbehaves or a code shows. Give us the code and the pan you tried when you book.


A Dacor Modernist induction cooktop that stays off may simply be starting up: the touchscreen takes about a minute to boot. After that, the chart points to the fuse or breaker, then to burner controls set wrongly.

Slow heating or a cooktop that ignores the pan is mostly a cookware match: off-center, wrong size, a base that is not magnetic or flat. Dacor's tables for the Modernist cooktop and the Heritage induction range agree on that.
Nothing else in our researched dishwasher codes connects to this topic. Match the exact message to your model's manual, and do not swap in another code from the library.
See the research statusPart names come once the technician has run the diagnostic and read your model and serial number. We order nothing on a hunch, and you approve the cost before any work starts.

An induction zone only heats cookware with a magnetic, flat bottom that sits on the zone. Dacor's guides tie most no-heat and slow-heat complaints to the pan. The Heritage Induction range flashes No Pan Detected for a wrong pan. The Modernist cooktop prints codes for keys held and for a fan problem.

ConnectOn links a Dacor hood by Bluetooth to a compatible Dacor cooking product. While connected, the hood fan starts on its own when you turn on a burner or element and shuts off when you turn it off. Fan turn-ons you did not expect usually trace to this link or to the auto-on feature.
How the visit goes.
Clear steps, start to finish.

Choose the appliance and share the code or symptom. Mention whether yours is a Modernist or a Transitional model.

The technician traces the issue, explains it in plain terms and agrees the cost with you before any repair begins.

Once the repair is done, the technician checks the result with you and explains what was replaced.
Use flat, ferromagnetic cookware centered on the zone. Non-magnetic, small or off-center pans are the usual reason a zone will not heat.
Spills or items on the controls can cause odd behavior. Clean and dry the area, then reset the controls.
The Modernist guide advises switching the circuit breaker off for 15 seconds if the cooktop acts unusually.
The Modernist cooktop prints C0, C1, C2, F0, F1, F2, A2, UP and d0. Restart with POWER, and if it stays, unplug for 30 seconds.
F0 and A2 on an induction cooktop are not oven codes. Tell us which appliance showed the code.
Schedule a visit when a code returns after the restart and the power disconnect.
Schedule a visit when E2 returns on a Heritage Induction range after a 10-second power-off.
Schedule a visit when the cooktop heats weakly with the right pan.
Leave the boards, coils and fan to the technician.
Arrange a diagnosticThe technician describes the repair and agrees the cost with you before starting. We confirm the final figure once the oven, range or cooktop has been inspected.
Dacor handles repairs that its manufacturer warranty covers. We provide a warranty of our own on the work we do.
The Heritage Induction guide lists an empty zone, non-magnetic cookware, an uneven bottom, an off-center pan or one too small for the zone.
On the Modernist induction cooktop the guide says the fan motor is malfunctioning, from a board, wiring or blade blockage. It needs a technician.
The input voltage is too high or low. Per the guide, check the power connection and switch the cooktop on only once the voltage is regulated, 208 V to 240 V.
The guide says scratches cannot be removed. Use glass-ceramic cleaning cream, and a single-edge razor scraper on cool glass for burnt spots.
While the manufacturer's warranty runs, that repair is the manufacturer's to handle. Once it ends, or if you prefer an independent technician, book a visit and the cost is settled with you first.
Dacor codes, symptoms, parts, repairs
A Dacor Modernist induction cooktop that stays off may simply be starting up: the touchscreen takes about a minute to boot. After that, the chart points to the fuse or breaker, then to burner controls set wrongly.
An induction zone only heats cookware with a magnetic, flat bottom that sits on the zone. Dacor's guides tie most no-heat and slow-heat complaints to the pan. The Heritage Induction range flashes No Pan Detected for a wrong pan. The Modernist cooktop prints codes for keys held and for a fan problem.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.