What it means
C-d0 on a Dacor DMO30U970SS microwave means the control buttons have been touched for over 1 minute. Clean the keys and check for water on the surface around them. If it returns, turn the microwave off for more than 30 seconds.
Dacor microwave C-d0 / Control keys
C-d0 on a Dacor DMO30U970SS microwave means the control buttons have been touched for over 1 minute. Clean the keys and check for water on the surface around them. If it returns, turn the microwave off for more than 30 seconds.
Also shown as C-d0
C-d0 on a Dacor DMO30U970SS microwave means the control buttons have been touched for over 1 minute. Clean the keys and check for water on the surface around them. If it returns, turn the microwave off for more than 30 seconds.
Wipe the control panel with a clean cloth.
C-d0 re-appears after cleaning and a 30-second power-off.
Your Dacor tick-list / held on this device

Wipe the control panel with a clean cloth. Do not use abrasive cleaners.

Check for water on the surface around the keys, as the manual says, and wipe it away.

If C-d0 appears again, turn the microwave off, let it sit for more than 30 seconds, and try setting again.
If the code returns after that, the control panel needs service.
Tell us the model and which checks you have done, then open your request from here.
Book a visit

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
A control button has been held or sensed as pressed for over one minute. The oven treats it as a stuck key.
Read the supporting manualThe manual points at dirt on the keys and water around them. A cloth or object resting on the panel is another possibility, though the manual does not list it.
Read the supporting manualC-F2 says a touch button malfunctioned, and the remedy is to touch STOP and try again. C-d0 is a long press, and the remedy is cleaning and a 30-second power-off.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DE68-04568E-00, 2023-04-13 / PDF p.39 (English; Appendix, Information codes)
For C-d0: the Dacor slim over-the-range microwave DMO30U970SS. Source is the Information codes table in the appendix of its user manual; the other Dacor microwaves print no such table.
No. The cooktop code means a key pressed for 8 seconds, and the oven code means a key held for 1 minute. This microwave code means over 1 minute.
Condensation on the panel is a form of water around the keys, which the manual says to check.
Turn it off and wait more than 30 seconds. The manual does not say to unplug for C-d0.
When C-d0 re-appears after cleaning and a 30-second power-off.
Dacor codes, symptoms, parts, repairs
C-F2 on a Dacor DMO30U970SS microwave means a touch button has malfunctioned. Touch STOP and try the button again. Book a visit if it keeps happening.
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.