What it means
C-F0 on a Dacor DMO30U970SS microwave means it sensed an internal communications failure. Unplug the power cord and book a visit; the manual lists no other owner step.
Dacor microwave C-F0 / Communication
C-F0 on a Dacor DMO30U970SS microwave means it sensed an internal communications failure. Unplug the power cord and book a visit; the manual lists no other owner step.
Also shown as C-F0
C-F0 on a Dacor DMO30U970SS microwave means it sensed an internal communications failure. Unplug the power cord and book a visit; the manual lists no other owner step.
Pull the plug, or switch the breaker off for an over-the-range unit, as the manual instructs.
C-F0 shows.
Your Dacor tick-list / held on this device

Pull the plug, or switch the breaker off for an over-the-range unit, as the manual instructs.

Do not keep plugging it in to test it. Repeated attempts do not change a failed internal link.

Write down what the microwave was doing and whether it just got power.
Give us the code C-F0 and the model number when you book, so the visit is planned.
Tell us the model and which checks you have done, then open your request from here.
Book a visit

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
The microwave sensed an internal communications failure. Parts of its electronics stopped talking to each other.
Read the supporting manualC-F1 is specific to the EEPROM memory failing to read or write. C-F0 is a general communications failure.
Read the supporting manualThe manual gives no clearing step. It says to unplug and contact a service center, so we offer a visit.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DE68-04568E-00, 2023-04-13 / PDF p.39 (English; Appendix, Information codes)
For C-F0: the Dacor slim over-the-range microwave DMO30U970SS. Source is the Information codes table in the appendix of its user manual; the other Dacor microwaves print no such table.
The manual gives no safety warning beyond unplugging. Keep the unit unplugged until it has been checked.
No. The cooktop F0 is a main-to-sub board link. This is the microwave and the wording differs.
The manual does not say what causes C-F0, so we cannot link it to surges or anything else. Tell us about recent outages when you book.
The code, the model and what the microwave was doing when C-F0 appeared.
Dacor codes, symptoms, parts, repairs
C-F1 on a Dacor DMO30U970SS microwave occurs only when EEPROM read or write is not working. Unplug the power cord and book a visit; the manual lists no other owner step.
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.