What it means
C-F1 on a Dacor DMO30U970SS microwave occurs only when EEPROM read or write is not working. Unplug the power cord and book a visit; the manual lists no other owner step.
Dacor microwave C-F1 / Memory
C-F1 on a Dacor DMO30U970SS microwave occurs only when EEPROM read or write is not working. Unplug the power cord and book a visit; the manual lists no other owner step.
Also shown as C-F1
C-F1 on a Dacor DMO30U970SS microwave occurs only when EEPROM read or write is not working. Unplug the power cord and book a visit; the manual lists no other owner step.
Pull the plug or switch the breaker off, as the manual says to unplug the power cord.
C-F1 shows.
Your Dacor tick-list / held on this device

Pull the plug or switch the breaker off, as the manual says to unplug the power cord.

A memory chip that cannot be read or written will not recover by repeated attempts.

The model number is on the label inside the door frame or the manual cover.
Give us the code C-F1 and the model number when you book, so the visit is planned.
Tell us the model and which checks you have done, then open your request from here.
Book a visit

This drawing is schematic, since the inside of a Dacor changes from model to model. Press an outlined part for its photo and the check that goes with it.
The EEPROM, a small memory chip that holds settings, could not be read or written. The manual says the code occurs only in that case.
Read the supporting manualC-F0 is a general internal communications failure. C-F1 names the EEPROM specifically.
Read the supporting manualThe manual does not say. A technician can tell you more after checking.
Read the supporting manualManufacturer document
Dacor (Dacor-branded document hosted on image-us.samsung.com)
DE68-04568E-00, 2023-04-13 / PDF p.39 (English; Appendix, Information codes)
For C-F1: the Dacor slim over-the-range microwave DMO30U970SS. Source is the Information codes table in the appendix of its user manual; the other Dacor microwaves print no such table.
A type of memory chip. The manual uses the name without explaining it.
The manual does not say. Because the table asks you to unplug, treat the oven as out of use.
They both involve the EEPROM, but they are on different appliances with different remedies.
Right away, since the manual lists no owner fix for C-F1.
Dacor codes, symptoms, parts, repairs
C-F0 on a Dacor DMO30U970SS microwave means it sensed an internal communications failure. Unplug the power cord and book a visit; the manual lists no other owner step.
A Dacor slim over-the-range microwave that will not work has a short checklist: power not supplied, the door open or caught on debris, the Child Lock on, or too many devices on one outlet. Check these before anything else.
Book a diagnostic for your model at the appliance itself.
Office details and the access notes to pass on.