Error codes explained

The same letters on three Dacor appliances

Dacor uses look-alike letters on three appliances. d0, F0 and F2 appear on a wall oven, an induction cooktop and a slim microwave, and each table words them differently. Read the code from the display of the appliance in front of you, then use only that appliance's table and first step. [1][2][3]

Kitchen wall with a wall oven, an induction cooktop and a built-in microwave, each control display softly lit.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • C-d0 is a key held for 1 minute on the oven and the microwave, but d0 is over 8 seconds on the cooktop. 123
  • The cooktop writes C0, C1 and C2 without a dash; the oven writes C-20 and others with one. 12
  • The oven restart wait is 30 seconds; the cooktop breaker wait is 15 seconds. 12
  • Only the slim DMO30U970S microwave in our files prints codes. 36
  • Name the appliance when you book, then the code exactly as shown. 123

Does a C code mean the same thing on every Dacor appliance?#

No. The same letters appear on three Dacor appliances with different meanings and different first steps. An oven prints C-d0, C-F0 and C-F2; an induction cooktop prints C0, C1, C2, d0, F0 and F2; and a slim over-the-range microwave prints C-10, C-d0, C-F0, C-F1 and C-F2. 123

So the first question is not "what is the code" but "which appliance is showing it". Read the code from the display of the appliance in front of you, and use the table for that one. A look-alike on the next appliance can send you down the wrong path.

The dark control strip of a wall oven with a short code of lit orange segment characters, above the oven door handle.
A code on an oven display: the oven table applies. 1

What do the look-alike codes mean on each appliance?#

Three codes repeat across all the tables: d0, F0 and F2. On the oven they are about the keys and about the oven's own control boards. On the cooktop and the microwave they are worded differently. 123

LettersOven (Modernist wall oven)Induction cooktop (DTI30/36M977)Microwave (DMO30U970S)
d0C-d0: control key was short for 1 minute 1d0: a key pressed for more than 8 seconds 2C-d0: control buttons touched over 1 minute 3
F0C-F0: communication between Main and Sub PBA interrupted 1F0: communication between the main and sub PCBs failed 2C-F0: internal communications failure sensed 3
F2C-F2: communication between Main and Touch interrupted 1F2: communication with the touch-enabled IC failed 2C-F2: a touch button has malfunctioned 3

Look at the third column of the microwave: C-F2 there is about one button, while on the oven it is about two parts talking to each other. The wording of the manual is the guide, not the letters.

Which codes exist on only one of the three?#

Oven only: C-d1, C-20, C-21, C-23, C-30, C-31, C-70, C-72 and C-A2. Cooktop only: C0, C1, C2, A2 and UP. Microwave only: C-10. One more pair looks alike: cooktop F1 and microwave C-F1 both concern the EEPROM, and the oven table has no such row. 123

Dashes matter. The cooktop writes C0, C1 and C2 with no dash, and the oven writes C-20 with one. A cooktop A2 is a fan motor problem. An oven C-A2 is an abnormal cooling motor function. They are different parts. 12

The oven code library, the cooktop code library and the microwave code library each hold the rows for their own appliance.

What do the one-appliance codes ask me to do?#

On the cooktop, UP means the input voltage is too high or low. The manual says to check the power connection and to turn the cooktop on only after the voltage is regulated to 208 to 240 V. A2 is a DC motor that cannot run, from a defect in the board, the wiring or a blocked motor blade. 2

On the microwave, C-10 means the gas sensor is open or shorted, and the table says to unplug the power cord and then contact service. 3 On the oven, C-31 and C-A2 have no home step at all; both say to call for service. 1

What does each appliance tell me to try first?#

The oven says press OFF and restart. The cooktop says turn it off and restart. The microwave says to unplug the power cord, except for C-F2 and C-d0, which have their own steps. Each then moves on to a service call. 123

ApplianceTypical first step in the tableSecond stepSource
Oven or rangePress OFF, restartDisconnect all power for at least 30 seconds1
Induction cooktop (C0, C1, C2)Turn the cooktop off, restartUnplug the power cord for 30 seconds or more2
Induction cooktop (F0, F1, F2)Restart with the POWER buttonDisconnect power for more than 30 seconds2
Microwave (C-10, C-F0, C-F1)Unplug the power cordThen a service call3
Microwave (C-F2)Touch STOP, then try the button againThen a service call3

The cooktop also has a general line for a cooktop that responds unusually: switch its breaker off for 15 seconds. 2 That is a shorter wait than the oven's 30 seconds, so keep the two straight. Our oven restart guide covers the oven's three rungs.

What about the d0 codes and a wet or crowded panel?#

All three d0 rows point at the keys. Dry the panel and clear anything resting on it. The oven wants clean buttons with no water; the cooktop wants you to check whether the keypad is wet or a key is held down; the microwave wants clean keys. 123

On the microwave, the next step after cleaning is to turn the microwave off, let it sit for more than 30 seconds, then retry. Should the code come back, it says to contact service. 3 The cooktop adds a restart with the POWER button. 2

A hand wiping the glass surface and edge of an induction cooktop with a gray microfiber cloth, no cookware on it.
Cookware or water on the touch strip is a first thing to clear. 2

Which Dacor appliances have no C codes at all?#

The Dacor refrigerators, the dishwasher and the other microwaves in our files do not use this style. The refrigerator manuals have symptom tables and indicators, the dishwasher uses codes like LC and 5C, and the other microwaves show ERROR. 456

Of the Dacor microwave manuals we hold, only the slim over-the-range model prints a code table. The drawer, convection and countertop models show ERROR with a short explanation, for example for a wrong clock entry. See the microwave service page for the models we cover.

How do I tell the technician which one I mean?#

Say the appliance first, then the code exactly as shown, then the model. "Oven, C-d0" and "microwave, C-d0" are two different jobs. The display letters are not enough.

  • The appliance and its model name from the manual's cover.
  • The code with its dash, or without one, as the display shows it.
  • Whether you cleaned or dried the keys and what happened next.
  • Whether a restart was tried, and for how long the power was off.

The oven, cooktop and microwave service pages list what we repair on each.

Sources#

  1. User Manual, Modernist Built-In Electric Wall Oven DOB30M977Dacor (Dacor-branded document hosted on image-us.samsung.com) · Part No. 112177 Rev B / DG68-00920A-00 · PDF p.64 (Information codes)
  2. User Manual, Electric Cooktop DTI36M977BB, DTI30M977BBDacor (Dacor-branded document hosted on image-us.samsung.com) · Part No. 113935 Rev. A / DG68-00899A-00, 2017 · PDF p.62-63 (Troubleshooting, Information codes)
  3. User Manual, Microwave Oven DMO30U970S*Dacor (Dacor-branded document hosted on image-us.samsung.com) · DE68-04568E-00, 2023-04-13 · PDF p.39 (Appendix, Information codes)
  4. User Manual, Built-In Fridge DRR24980*** / DRR30980*** / DRR30990*** / DRR36980***Dacor (Dacor-branded document hosted on image-us.samsung.com) · DA68-03607B-07 (BRR9000M), 2020-12-11 · PDF p.42-45 (Troubleshooting, sounds)
  5. User Manual, Built-In Dishwasher DDW24G9000APDacor (Dacor-branded document hosted on image-us.samsung.com) · DD68-00250L-00 (DW8700B), 2024-01-11 · PDF p.74-75 (Information codes)
  6. Convection Microwave Oven Use and Care Manual, Model DCM24Dacor (Dacor-branded document hosted on image-us.samsung.com) · Part No. 106442 Rev. C · PDF p.12 (ERROR on a wrong clock entry)

Here to help

Good questions.
Clear answers.

Talk to our team
Is C-d0 the same code on a Dacor oven and a Dacor microwave?

Not quite. The oven row says the control key was short for 1 minute. The microwave row says the control buttons were touched over 1 minute. Both point to the keys, but the first steps differ. [1][3]

Does a Dacor cooktop use C- codes like an oven?

It uses C0, C1 and C2 with no dash, for the top sensor and the IGBT sensor. The oven uses C-20, C-21 and others for different parts, so a cooktop code is read from the cooktop table. [1][2]

What is F0 on a Dacor induction cooktop?

The Modernist cooktop manual says F0 is a failed communication between the main and sub PCBs. It asks you to restart with the POWER button, then disconnect power for more than 30 seconds. [2]

Which Dacor microwave prints codes?

In our files, the slim over-the-range DMO30U970S prints C-10, C-F0, C-F1, C-F2 and C-d0. The drawer, convection and countertop microwave manuals show ERROR messages and no code table. [3][6]

Should I read an oven table for a cooktop code?

No. Take the code from the display of the appliance that shows it and use that appliance's table. Letters shared across the three carry different meanings and first steps. [1][2][3]

Let’s take care of it.

See a C-code?
Tell us the number.